RING HOLDER - TREE BRANCH

I really needed someplace to put my wedding rings on the bathroom counter of our beach cottage.  The granite we had picked out for the countertops was beautiful, but small items disappeared from view when you set them down on the surface.  I could see myself inadvertently knocking my rings into the sink and down the drain.  I was looking for a cute little plate or an actual "ring holder", but nothing really grabbed me that was worth buying.

One day my husband and I were trimming the trees in our backyard.  As I was chopping up large branches into smaller pieces - this piece caught my eye.  Looking at the nubs left from trimming the branches I thought - "Hey - that could be a ring holder!"

In initially tried silver spray paint, but it wasn't quite the right silver (I had used some leftover paint I had from a while back).  It looked strange next to the brushed nickel hardware on the faucets.  After seeing it in the space - a high gloss white spray paint was my next try...

This branch definitely does what I need it to do, and the best part is that it was free!  Between the found branch and leftover spray paints - it didn't cost me a thing. woo-hoo!

 

 

For more beach cottage posts see my Beach Cottage page.

PAINT DISTRESSING TECHNIQUES - SANDPAPER, CANDLEWAX, VASELINE

The purchase of our beach cottage prompted my interest in painted and distressed furniture.  I had very little experience with this process, but big dreams about reviving thrift store and Craig's List pieces of furniture.  I had a lot to learn, which I soon realized when I got started.  Overall, it was fun to get a chance to learn something new and get to apply it in so many different ways.  This is a summary of my experience with these three methods over the past year.

SANDPAPER

CANDLEWAX

VASELINE

These three methods can be used to create a weathered/distressed look when painting.  Most of this information can be found within my individual posts for each project, but I decided a summary might be helpful for anyone looking for some general direction and advice.  I'll start with the pro's and con's of each technique...

SANDPAPER

Provides a good look but takes some elbow grease to sand the paint down to the next level.  This works on flat surfaces if you want a slightly scraped weathered look.   If you want to weather corners and edges - using just sandpaper is possible, but note that candlewax will make the process easier.  When you use sandpaper alone - you run the risk of weathering right past a layer you are trying to expose.  Sandpaper alone is not a good choice if you are trying to achieve a chipped paint look exposing multiple layers of paint.

When using just sandpaper to distress, I wait until my piece is really dry.  If the piece is still slightly wet, you might end up messing up your piece.   Depending on the look you want, you can use any grit of sandpaper, I would recommend starting with a lighter grit (120 or less) and moving to heavier (80 or more) if you are not getting the results you want.  Once I'm finished distressing, I typically finish my pieces off with a final coat or two of clear acrylic polyurethane if I am concerned about durability.

Here are some of my projects where I used sandpaper to do some weathering...



The flat surface weathering was done here with just sandpaper.  Note - candlewax was used to create the letters and it ws used on the edges/corners of the plaque. (See link to post here)



Sandpaper was used to weather this barn wood sign.  It worked particularly well because of the texture of the barn wood.  (See link to post here)

Nightstand distressed with sandpaper.  (See link to post here)




Dive flag made from barn wood and distressed with sandpaper.  (See link to post here)



Old Cola Crate painted and then sanded with sandpaper  (See link to post here)




Chairs finished with a drift wood inspired painted finish with a light sanding to expose bare wood underneath.  (See link to post here)

 

CANDLEWAX

A great option for weathering and exposing corners and edges.   It is MUCH easier to remove paint with sandpaper if candlewax is applied prior to painting.  The candlewax does a great job of preventing the paint from adhering to the surface, and it is easily scraped/sanded off.  This is ideal for subtle distressing and tends to look more weathered than chipped.  The application of candlewax is very easy, as you can simply focus on edges and corners and scratches and dents.  If you want to have a more chipped paint effect - Vaseline is a better way to go.

Start with a base layer.  This can be bare wood, stained wood or paint.  To do this technique, take any old candle (I choose to use cream or white just so there aren't any issues with colors you don't want on your finished piece).  Rub the candlewax on any surface where you will want the base layer exposed (corners, edges, cracks, dents, any area you want).  Paint over the entire surface of your piece and let dry.  Use sandpaper to remove the paint where you applied the candlewax.   I typically finish my pieces off with a final coat or two of clear acrylic polyurethane if I am concerned about durability.


CANDLEWAX TIPS

1. Don't be afraid to apply enough candlewax.  If I'm going over corners - I try to "over do it" onto the edges a little bit for a more visibly noticeable weathered effect, otherwise you might be disappointed.
2. Use old pieces of sandpaper when weathering a piece after using candlewax - the sandpaper becomes gooped up with paint and candlewax and you will likely need to throw these pieces away.
3. If you don't want any inadvertent scratches on the remaining paint - be careful to just sand the areas where the candlewax was applied (although, sometimes these scratches can add more character).  

Here are some of my projects where I used candlewax to do some distressing...



Dresser distressed using candlewax primarily on edges and corners.  (See link to post here)





Wall plaque with letters created using a paper stencil and candlewax.  (See link to post here)



 

Bar stools distressed using candlewax.  (See link to post here)




Nightstands distressed using candlewax on corners and onto flat surfaces to create a pretty weathered effect.  (See link to post here)

 

 

Candlewax used on light distressing of media table.  (See link to post here)

 

 

VASELINE

A great option for a chipped paint technique.  This method takes some getting used to if using a lot of Vaseline on areas and brushing paint overtop (see tips below on this process).  It's a little messy.   Vaseline is really the way to go if you are trying to expose multiple layers of paint.  Be sure you have a good distressing plan to avoid it looking too contrived.

Start with a base layer.  This can be bare wood, stained wood or paint.  With a small to medium sized artist brush, apply Vaseline to the areas where you wish for the base layer to be exposed.  Next, paint over the entire surface of your piece.  Note that where the Vaseline is - the paint will look messy and goopy - that's OK - just leave it - this will help you know where to scrape off the paint later.   Let the paint mostly dry.  Use a plastic scraper to remove the paint where you applied the Vaseline.  You can also go over these areas lightly with sandpaper.   Your piece will feel a little greasy after scraping off the paint from the residual Vaseline.  Clean up with a little all-purpose cleaner before doing any more layers of paint or polyurethane.  If you are doing multiple layers of different colored paint - simply keep repeating this process.  I typically finish my pieces off with a final coat or two of clear acrylic polyurethane if I am concerned about durability.

VASELINE TIPS

1. Apply the Vaseline with a small to medium sized artist brush.
2. If you are brushing on paint over Vaseline - be prepared for the paint on top of the Vaseline to look goopy and messed up.  Know that it's OK - leave it that way.  Resist the temptation to try to smooth it out - you are going to scrape off this paint anyway.  Furthermore - that goopy look will later help you identify what you need to scrape off.
3. After using Vaseline on a piece it will feel a little greasy/slimy.  I recommend going over your piece with a little all purpose cleaner and a wipe with a cloth rag.  This is important if you are going to apply additional coats of paint for distressing (more Vaseline can be applied to focused areas after cleaning up the piece to prepare for the next coat of paint).  It is also important if you are applying a coat of polyurethane.
4. Use a plastic scraper when removing paint for the Vaseline technique.  A metal scraper can tend to scratch where you don't want it to.

Here are some of my projects where I used Vaseline to do some chipped paint looks...




Distressed chest of drawers created with both Vaseline and candlewax.  (See link to post here)



End table heavy distressed with Vaseline as well as candlewax.  (See link to post here)

GENERAL MISTAKES TO AVOID

1. If you are trying to expose a wood stain as a base coat - and if you have to do some sanding to prepare for painting (to rough up a top coat of polyurethane) - be sure to sand lightly in order to avoid going all the way down to the bare wood.
2. Also, if you are trying to expose wood stain and have mistakenly sanded down to bare wood in some areas (don't worry) - just place candlewax or Vaseline on the stained areas (rather than bare wood) so the stained areas will be exposed with your distressing (rather than bare wood).
3. Distressing Plan - If you are doing heavy distressing - don't make what I call the leopard print mistake (a bunch of small areas of distressing placed over the entire area of your piece).  It will look very silly and contrived.   A good plan - distress edges and corners, distress existing scratches/dents and imperfections, if you want to create large areas (example with Vaseline to create large areas of chipped paint - pick a few large areas to distress.  See this post on my experience with heavy distressing.

What NOT to do when distressing - "the leopard print mistake".  See a better example of distressing here.

GENERAL TIPS

1. Test the paint techniques on small scrap pieces.  It's worth the time to help you understand how these different techniques work, and do a test run of paint colors.
2. I'm a big fan of using Lowe's paint samples - they are only $3 each - and you can have them mix any custom color you want.  Note - The Valspar samples only come in Satin Latex.
3. If you are doing heavy distressing and focusing on large areas - I have found using chalk to mark out your distressing plan on a piece is very helpful.  It can identify your areas of distressing and can easily be wiped off after candlewax or Vaseline has been applied.
4. Use the existing scratches and dents on a piece to your advantage.  Focus on these areas for some distressing.  Real scratches or dents don't look manufactured or contrived like some faux distressing.

All of the posts found above (and more) can be found on my Beach Cottage page.

BLUEBERRY MUFFINS

This was my go-to blueberry muffin recipe and I modified to make it "real food".  The recipe came from justapinch.com and you can find the original post here:

http://www.justapinch.com/recipes/bread/muffins/blueberry-blueberry-muffins.html?p=1

Yes, I still use sugar - I have not yet tried to make this with another sweetener like pure maple syrup or otherwise.

Note that many of the ingredients need to be room temperature - I have found this to be important in most baking.  Take the time to set your ingredients out for a couple hours to get to room temperature.

You can make this in regular size muffin tins (you can get 12-16 from this recipe), but lately I have been making them as mini muffins and I get 36 of them.  Sometimes you don't want the whole big muffin and the mini muffins make different portions for different people possible.  Plus they are so darn cute!

INGREDIENTS

Muffins

1 Stick Butter - Room Temperature  OR 1/2 stick butter & 1/4 cup Plain Yogurt - Room Temperature
1 cup Sugar
2 Large Eggs - Room Temperature
1 tsp Vanilla Extract
2 tsp Baking Powder
1/4 - 1/2 teaspoon Sea Salt
1 Tbsp Lemon Zest (this is my addition to the original recipe)
2 1/2 cup Fresh Blueberries (If I don't have fresh I thaw some frozen organic blueberries)
2 cups White Whole Wheat Flour
1/2 cup Milk - Room Temperature
Paper muffin liners (optional) see step 7 in directions below.

Crumb Topping

1/4 cup White Whole Wheat Flour
1/3 cup Sugar
2 Tbsp Butter - Cold

NOTE - I use organic butter, yogurt, sugar, eggs, blueberries, flour and milk.

DIRECTIONS

Preheat oven 375 for conventional oven (325 convection oven)

1. Measure 3/4 cup blueberries and mash them with a fork.
2. Cream butter ( and yogurt) and sugar with paddle attachment until light and fluffy.
3. Add eggs, vanilla, baking powder salt, and lemon zest mix well.
4. Add the mashed blueberries and mix on low.
5. Add half the flour, mix on low until combined well, mix in half the milk on low...add the remaining half of flour mixing on low...then end with the remaining milk still mixing on low until well blended.
6. Fold in whole blueberries.
7. Scoop into prepared muffin pan (either paper lined or use butter).  If you have non-stick pans - you can use butter - use a crumpled up piece of waxed paper rubbed on a stick of butter and then rubbed into the bottom and sides of muffin tins, and a little around the top edges.  The original recipe called for Pam but I just can't use that stuff anymore.  If you are not using non-stick muffin pans - paper muffin liners are probably your best bet.
8. To make the crumb topping, put the flour, sugar and butter in a small bowl and use a fork or pastry blender to combine the ingredients into a crumbly mixture.
9. Sprinkle tops of the muffins with crumb topping mixture.
10. Let rest about 5 minutes before baking.  Bake for 25-30 minutes at 375.  (25 minutes at 325 for a convection oven)
11. Let cool before trying to remove from pan.

OATMEAL

This recipe was modified from 100daysofrealfood.com: http://www.100daysofrealfood.com/2011/12/14/recipe-oatmeal/

Ingredients

• ⅔ cup organic 2% milk
• ½ cup plain rolled oats (I buy the organic oats from bulk bins at Earth Fare)
• 1 spoonful yogurt (I use Stoneyfield lowfat organic)
• Hand full of raisins
• Cinnamon sugar

 

      (Optional)

• Cinnamon
• Honey
• Pure vanilla extract 

Instructions

1. In a small pot over high heat warm up the milk & yogurt. *Be sure to watch it carefully, it will start to bubble fairly quickly.
2. As soon as the milk starts to bubble drop in the oats & raisins, stir a few times, and turn the heat down to medium-low.
3. Let the oats simmer for 2 – 3 minutes. No need to stir.
4. Once the oats have soaked up most of the milk (here you can add vanilla, honey, cinnamon if you want - I don't use any of this) and mix.  Take off the heat and serve.
5. I sprinkle it with cinnamon sugar as I eat it. Or you can add it and mix it in before you serve.

 

You can find other recipes on my Real Food Page.

VEGETABLE SOUP

ORIGINAL RECIPE:  The original recipe was from a website called bemorehealthful.com and the link is no longer available, otherwise I would have included it here.  I have modified the recipe slightly.

Serves 4

Ingredients

• 2 tbsp olive oil
• 1 tsp minced garlic
• 2 carrots
• 1 onion
• 3 stalks celery
• 1 zucchini
• 1 russet potato (I use 1/2 - cup whole wheat pasta cooked instead)
• 1-15 oz. can organic diced tomatoes and their juice
• 4 cups vegetable stock
• 1 bay leaf
• Salt and pepper
• 1/2 tsp Garlic Powder
• 1/2 tsp Garlic Salt
•  2 tbsp fresh parsley (If I don't have this on hand - I leave this out or use dried parsley)

 

Note #1 - I use all organic vegetables and organic vegetable stock when making this soup.

Note #2 - Obviously you can throw in any vegetables you have on hand.

Cooking Directions

1.      Chop the carrots, onion, celery, and zucchini into bite-sized cubes. Peel and cube the potato (unless you are using whole wheat pasta instead). Mince the parsley.

2.      Heat a large soup pot over medium high heat, and add the olive oil. Add the minced garlic and sauté briefly.  Add the onion, carrot, celery, zucchini, and a pinch each of salt and pepper, and the garlic powder and garlic salt, and allow the vegetables to cook and soften about ten minutes.

3.      Add the potato, tomatoes, vegetable stock, bay leaf, and another pinch of salt and pepper. Bring to a boil, then reduce the heat to medium low and simmer for 20 minutes.

4.      Add minced parsley (and the cooked whole wheat pasta if you are using this) to the soup in the last 5 minutes of cooking. Divide among bowls and serve or divide into small containers and freeze.

You can find other recipes on my Real Food Page.

 

TORTILLAS

Original Recipe: http://www.100daysofrealfood.com/2010/05/26/recipe-whole-wheat-tortillas/

I use these tortillas for a lot of different meals.  I like using these better than store bought tortillas or bread as I know exactly what is in them, and there isn't a bunch of extra preservatives and other ingredients we don't need.

• Breakfast burritos
• Sandwiches - a good alternative to regular bread.
• Soft taco shells

This is basically the 100 days of real food recipe, but I took some suggestions from a comment on her blog and found that they were helpful in getting better results.  I have summarized them here...

TIPS

(1) Use a little less oil and a little more water than what the recipe calls for.
(2) I have used both whole wheat and white whole wheat flour.  Both work, the white wheat are just a little lighter in texture.
(3) It is very important to let the dough sit for 15 minutes before rolling it out.  It is much less sticky and easier to work with.
(4) In the recipe, she cautions about using too much flour, but as the comment stated - you need to use enough, or it's just too sticky, so. . . use enough flour when rolling them out.
(5)  Don't roll them all out and stack them on a plate before cooking them.  I made this mistake last time and they stuck together and I had to re-roll half of them out.
(6) The recipe calls for medium high heat.  I found this to be too hot for my non-stick pan, as well as my cast iron skillet.  Medium heat works just fine. 
(7) I like the results with the cast iron skillet much better than my non-stick pan.
(8) The comment suggested the following technique/process works out well.  Put in pan for only 10 seconds, than turn over and cook the second side for the full 30 seconds.  Then turn and finish cooking the first side for 20 seconds.  She cautions about turning too much, or the tortillas will become stiff.
(9) I let the tortillas mostly cool and place them in Ziploc bags with wax paper in between.  I place half of them in the fridge to use soon and the other half in the freezer.
(10) Don't let them sit out too long or they will become stiff.

Serves: 12 Tortillas

 

Ingredients

• 2½ cups whole-wheat flour (I used King Arthur’s white whole-wheat flour)
• ½ cup oil (I used olive oil) (I use a little less than what is called for here based on tip from comment section)
• 1 teaspoon sea salt
• 1 cup warm water (heat in the microwave for 1 min) (I use a little more than what is called for here based on tip from comment section).

Instructions

1. In the bowl of a heavy-duty mixer set with a dough hook, pour in the flour, oil and salt. Beat with the dough hook until crumbly, about 3 to 5 minutes. I found I need to scrape the sides down multiple times if using a dough hook.  It doesn't seem to mix well until you add the water in the next step.
2. With the mixer running, gradually add the warm water and continue mixing until the dough is smooth, about 3 minutes.
3. Take out the dough and divide it into 12 equal sized pieces. Do this by making the dough into a big log shape that is about 8 – 10 inches long. Then cut it in the middle. Then cut each of those pieces in the middle and so on until you have 12 pieces.
4. Using the palms of your hand roll each piece into a round ball and flatten it out on a baking tray or board. Cover with plastic wrap and let rest at room temperature for at least 15 minutes or up to one hour.
5. Heat a cast iron skillet (I think this works best), griddle or 12-inch skillet over medium heat.   I found that medium-high is just too hot.  The pan should be fairly hot before you begin cooking the tortillas.
6. On a lightly floured board or counter top, use a rolling pin to turn each ball into a 8 to 10 inch flat circle (measure against your recipe if printed on a 8.5X11 sheet of paper).  They should be fairly thin.  Be careful not to use more than a teaspoon or two of flour when rolling out each ball into a tortilla because too much excess flour will burn in the pan, but use enough flour or they will be too sticky.
7. Grease the pan with a touch of olive oil and then carefully transfer each tortilla, one at a time, to the pan and cook for 10 seconds on the first side, then 30 seconds on the second side, then back to the first side for 20 seconds.  As the tip in the comment section said - too much turning will make them tough.
8. Set aside on a plate to cool slightly. Eat within an hour, refrigerate or freeze.  I refrigerate half of them to eat soon, and freeze the other half to eat later.

 

You can find other recipes on my Real Food Page.

DISTRESSED MEDIA CABINET

  

This is one of my favorite before and after projects.  This piece was created for our friend's bonus room.  The original media cabinet was found at a local thrift store for $50.  Lot's of scratches and a few chips but the glass doors were intact and it had all six shelves - what more could we ask for?

Before Photo



After Photo

The inspiration for this room re-do, came from Wisteria catalogue.  My friend saw this picture and was drawn to how bright and fresh this room was, so this became a reference for all our decorating.  We acknowledged that white sofas aren't ideal in a home with pets and small children, but we could use white in other furniture and décor choices...



Inspiration Room from Wisteria.com

We knew we wanted white furniture in the room, and the original plan was to do the whole piece in a distressed white finish, however, some pictures of distressed white furniture on pinterest inspired me to just distress the top with some sanding rather than painting it white.

The yellow knobs are from Hobby Lobby and I love how they complete the piece and provide even more character.

 

PROCESS

SANDING - The whole piece was sanded with 80 grit sandpaper and then 120 grit sandpaper.    On the larger surfaces I was able to use our small rotary sander.  The corners and smaller edges required hand sanding.  Note - I tried to avoid over sanding the corners of the base down to bare wood because I knew I wanted to exposed some of the dark stain in distressing. The top required some extra sanding (a lot more) to weather it and expose some of the bare wood. 

PREPARATION - After sanding I wiped down the entire piece and taped off the top (since the top was the only part that was not going to be painted white).  In addition, tape was placed on the edges of the glass on the doors.

DISTRESSING - I used candlewax to help with the distressing.  I rubbed a candle on all the edges and corners.  The candle wax makes removing paint and exposing the base so much easier than just using sandpaper.  Also, it definitely helps to use candlewax for distressing when using this type of paint (paint and primer in one). This type of paint adheres so well with the primer in it, it will also take more sanding to distress and remove the paint - as opposed to regular paint. 

PAINT - The paint I used was a paint and primer in one with a satin finish.  It was leftover paint from another project in their home.  In this case, paint and primer in one is good for covering a dark surface (the dark stained wood) with a light paint (an off white).  Please note, in my experience I have found that paint with primer in it dries quicker and has less "workable" time than a regular paint.  For example - if you mistakenly have a glob of paint, and wait to long to brush over to fix it - it might just make it worse by mucking up the paint that has dried too much already.   Overall, it is great for coverage, just work quickly and carefully.

DISTRESSING - Once the paint was dry - I used sandpaper to distress the edges.  Once again - the candlewax makes this an easy process; the paint comes off easily where the candlewax was applied and exposes the dark stained wood underneath.  You can see the sandpaper gets gooped up with the paint and candlewax in the photo below.

TOP COAT - I applied a top coat of satin polyurethane to the entire piece for added durability.  I believe some sort of top coat was necessary on the top since I had sanded off the original finish.  As for the bottom - perhaps it was not so imperative, but will provide a more durable surface particularly on the shelves.  Although...another scratch or two will just add more character :o)

Here are links to some other distressed furniture pieces I worked on for our beach cottage.  These pieces utilized a variety of techniques including candlewax, Vaseline and just simple sanding...


END TABLE - CANDLEWAX & VASELINE PAINT DISTRESSED








NIGHTSTANDS - CANDLEWAX PAINT DISTRESSED

CHEST OF DRAWERS - CANDLEWAX & VASELINE PAINT DIST...








DRESSER - CANDLEWAX PAINT DISTRESSED

NIGHTSTAND - SANDPAPER PAINT DISTRESSED

BAR STOOLS - DISTRESSED PAINTED

If you are interested in a general overview of some DISTRESSING TECHNIQUES, see my post here which covers the use of SANDPAPER, CANDLEWAX and VASELINE.

YELLOW ROCK - AN ODE TO BONAIRE...

To most people, this is just a yellow rock with the name of our beach cottage ("Turtle Cove") painted on it.  However, for those who have been scuba diving in Bonaire - it should bring back fond memories and a smile to your face. 

The island of Bonaire is a part of the Dutch Antilles (Aruba, Bonaire & Curacao).  It's a well known divers' paradise because if the extensive amount of shore diving.  Just drive around the island in your rented pick up truck, tanks loaded in the back, and locate dive sites marked with yellow painted rocks.  This was this memory that prompted my latest craft project - placing the yellow rock in our front yard with the name of our Florida beach cottage painted on it.

I located the perfect rock at a local landscaping/stone supply yard.  They had a whole pile of rocks approximately this size, and I was able to find one that provided a good flat surface for the placement of the name.  I believe this was referred to as a "Two Person" rock (based on the idea it takes two people to pick it up), however it was one of the smaller ones and I was able to pick it up myself.

The paint is an outdoor craft paint purchased at Hobby Lobby called "Patio Paint".  You can find this in the regular acrylic craft paint section.  I was delighted to find this because I could buy a small bottle for only a couple dollars.  Initially I had no idea what kind of paint I would use, and was concerned about buying a lot of expensive paint I didn't really need.  I did three coats of yellow as recommended on the bottle.  The colors are "Sunshine Yellow" and "Iron Black" for the lettering.

 

The lettering was penciled on to the rock after it was painted yellow.   I did this free hand in just basic lettering (similar to what we had seen in Bonaire - nothing fancy).   Then I used a small artist brush to paint the letters with the black paint.  The black paint from this line is a good dark paint that covers well and creates a strong black color.

 



I'm interested to see how this paint stands the test of time, especially with the wind and salty air along the Gulf Coast of Florida.  We shall see . . .

Here are a few other fun projects I worked on for our beach cottage...

  Barn wood beach sign (Ballard Designs knock-off). Find link here.

 

 Spray painted metal fish. Find link here.

 

 Barn wood dive flag.  Find link here.

 

 Beach cottage sign using candlewax technique.  Find link here.

 

  Coca-Cola crate painted in beachy colors.  Find link here.

For more beach cottage posts see my Beach Cottage page.

DENIM RAG PILLOW

 

 

I needed a toss pillow for this bedroom in our beach cottage. In my mind the bed needed just a little something in front of the yellow pillow sham...

I have seen the "rag" technique on pillows and tote bags recently (cut and frayed edges) and wanted to try this out myself.  I recalled the fabric used on these types of projects was something like canvas or denim.  I thought a denim toss pillow would work well here, so I dug into my fabric stash for some old faded denim pieces from a discarded pair of jeans.  I also found an off-white piece of canvas and some cotton ticking stripe fabric for the back of the pillow.

Getting the rag look is fairly simple.  All you need to do is stitch your fabric about 1/2 from the edges.  Then clip the fabric with a sharp pair of scissors (the scissors need to be particularly sharp at the points).  Finally, just wash and dry the item and there you go - frayed edges!

Here is the process I followed:

1.   Pre-wash your fabric.  I had several different pieces of fabric from several different sources, so I pre-washed all of them before starting.  This is important because you are definitely going to wash the piece after you are finished sewing, and you would hate for some strange shrinkage to happen and ruin the final product.

2.   Sew the design on your fabric (about 1/2" from the edges).

3.   Make the cuts for the edges to be frayed, the cuts should be about 1/4" apart.  Be sure not to go too far and cut your stitching.  This will take a little while.  I can't imagine how much clipping it takes to do an entire large quilt with this method!

4.   Sew the piece together.  I suppose you could trim after you sewed the pieces together (doing step #3 here after step #4). 

5.   Wash and dry the item.  I think I could have washed and dried this one more time to get a little "messier" frayed effect, but I was fairly happy with the results after the first wash and dry.

 

 

 

 

I'm pleased how this tiny little pillow added to the room and helps define the bed as a focal point in the room.  In addition, it was fun to try the rag effect.

 

For more beach cottage posts see my Beach Cottage page.